Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13703614

- Product Categories
- Friendly Links
- home > Supply > Separator can be adjusted by increasing or decreasing at the pad of paper bearing cap
Information Name: | Separator can be adjusted by increasing or decreasing at the pad of paper bearing cap |
Published: | 2015-04-26 |
Validity: | 90 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Generally, after every 300 hours of work separator should be cleaned bearing. If the bearing is oil lubricated, add new oil to fill the bearing gap when 1/3 is appropriate, no more than 1/2, before the job is often simply tighten the lid a little oil can lid. When the magnetic separator bearing severe wear or damage should be replaced, and pay attention to strengthening lubrication; use of tapered roller bearings, bearing axial spacing should be careful to check, to keep it as 0.2-0.4 mm, if still appropriate, by changes in the bearing cap at the paper pad to adjust. First, before (1) boot gold surface inspection of equipment, to ascertain the reasons for the last shutdown, if it is shut down because of mechanical failure, must be considered in order to troubleshoot boot. (2) after making sure that equipment (including electrical equipment) is correct, the first to operate equipment (such as pumps and host) were cranking, the revolution of discovery flexible rotation, no stuck phenomenon, indicating that the operation site accessibility, or to check remove obstacles. (3) before opening the valve to each host open pipes, faucets observe whether there is clogging, check the pressure gauge indicates the pressure value must meet specified requirements. (4) to start the pump. Before starting the pump, you must first open the cooling water pipes, the oil line ministries valve open, and then start the pump. After starting the pump pay attention to check the oil pressure is normal, if there is leakage around the oil, etc., be sure to make the oil to maintain a normal cycle. (5) start the host, after the normal operation, plus the exciting current, be careful not rated but should be added once steeled gradually added to the current provisions. After the first turn hosts the water is prohibited, prohibited after the first excitation transfer host, start with a load prohibited. Granulating machine: http: //www.lingruizz.com/ mixer: http: //www.lingruicn.com/ pressure ball machine: http: //www.zhiqiuji.com/ Phone: 13140158782,0371-86595263,15503714627 |
Admin>>>
You are the 4502 visitor
Copyright © GuangDong ICP No. 10089450, Zhengzhou Ling Rui Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 4502 visitor
Copyright © GuangDong ICP No. 10089450, Zhengzhou Ling Rui Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility